Enviar artigo por via de e-mail The Effect of Quenching Temperature on the Structure and Properties of Alloy Ei437B-VD Blades for a Helicopter Gas Turbine Engine
- Autores: Lomberg B.S.1, Letnikov M.N.1, Kabanov I.V.2, Chelombit’ko A.N.3
-
Afiliações:
- State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
- Elektrostal Metallurgical Plant
- Motor Sich Company
- Edição: Volume 60, Nº 5-6 (2016)
- Páginas: 617-621
- Seção: Article
- URL: https://bakhtiniada.ru/0026-0894/article/view/238840
- DOI: https://doi.org/10.1007/s11015-016-0340-5
- ID: 238840
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Results are given for a study of the effect of quenching temperature on macro- and microstructure, and mechanical properties of nickel-based superalloy EI437B-VD. It is shown that in order to improve structure stability and mechanical properties of rolled bar and stamped GTE blades made of alloy EI437B-VD, and also to avoid a different grain size, it is necessary to reduce quenching temperature in performing heat treatment from 1080 ± 5°C to 1020 ± 5°C.
Palavras-chave
Sobre autores
B. Lomberg
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Autor responsável pela correspondência
Email: lab3@viam.ru
Rússia, Moscow
M. Letnikov
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: lab3@viam.ru
Rússia, Moscow
I. Kabanov
Elektrostal Metallurgical Plant
Email: lab3@viam.ru
Rússia, Elektrostal, Moscow Region
A. Chelombit’ko
Motor Sich Company
Email: lab3@viam.ru
Ucrânia, Zaporozhie
Arquivos suplementares
