Structure and Contact Fatigue Strength of Heat-Resistant Steel VKS-7 Hardened Layers After Ion-Plasma Nitriding
- Autores: Gerasimov S.A.1, Kuksenova L.I.2, Semenov M.Y.1, Smirnov A.E.1, Shcherbakov S.P.1
-
Afiliações:
- Bauman Moscow State Technical University
- Blagonravov Institute of Mechanical Engineering, Russian Academy of Sciences (IMASh RAN)
- Edição: Volume 60, Nº 3-4 (2016)
- Páginas: 428-433
- Seção: Article
- URL: https://bakhtiniada.ru/0026-0894/article/view/238569
- DOI: https://doi.org/10.1007/s11015-016-0309-4
- ID: 238569
Citar
Resumo
Structure is studied for diffusion layers of heat-resistant steel 16Kh2N3MFBAYu-Sh prepared by ion-plasma nitriding, and their phase composition is established represented by ultra-finely dispersed incoherent chromium nitride particles in a solid solution matrix. Contact fatigue strength of the nitrided layer prepared by an optimized regime is determined by experiment. A feature is established for the effect of nitride layer thickness on contact fatigue strength for heat-resistant steel alloyed with nickel. Nitriding regimes are recommended for treating low modulus gear wheels and other similar components whose performance is governed by contact fatigue strength.
Sobre autores
S. Gerasimov
Bauman Moscow State Technical University
Autor responsável pela correspondência
Email: gerasimov_s@list.ru
Rússia, Moscow
L. Kuksenova
Blagonravov Institute of Mechanical Engineering, Russian Academy of Sciences (IMASh RAN)
Email: gerasimov_s@list.ru
Rússia, Moscow
M. Semenov
Bauman Moscow State Technical University
Email: gerasimov_s@list.ru
Rússia, Moscow
A. Smirnov
Bauman Moscow State Technical University
Email: gerasimov_s@list.ru
Rússia, Moscow
S. Shcherbakov
Bauman Moscow State Technical University
Email: gerasimov_s@list.ru
Rússia, Moscow
Arquivos suplementares
