| Edição |
Título |
Arquivo |
| Volume 61, Nº 3-4 (2017) |
Development of Innovations for Metallurgical Productions |
(Eng)
|
|
Zolotukhin V., Gordeev E., Provotorov D., Golovko A.
|
| Volume 61, Nº 1-2 (2017) |
Designing Schedules for the Cold Rolling of Tubes Without Intermediate Annealings |
(Eng)
|
|
Orlov G.
|
| Volume 61, Nº 1-2 (2017) |
Oil Absorption Capacity of the Contact Surfaces in Metal-Forming Processes |
(Eng)
|
|
Ogarkov N., Platov S., Shemetova E., Samodurova M., Terent’ev D., Nekit V.
|
| Volume 61, Nº 1-2 (2017) |
Preparation of Bimetal with Good Damping Properties |
(Eng)
|
|
Fedotova N., Chudakov I., Korms I., Makushev S., Pervukhin L., Saikov I., Arutyunyan N.
|
| Volume 61, Nº 1-2 (2017) |
Set of Measures for Improving the Quality of Powders Based on Titanium for Additive Technology |
(Eng)
|
|
Kotlyarov V., Yuzhakova E., Beshkarev V., Ivanov V., Kozlov R.
|
| Volume 61, Nº 1-2 (2017) |
Solidification Conditions for High-Strength Aluminum Alloy Ingots with Increased Transition Metal Content |
(Eng)
|
|
Bochvar S., Merkulova S.
|
| Volume 61, Nº 1-2 (2017) |
Crack Resistance of High-Strength Steel and Breakage of a Gas Pipeline |
(Eng)
|
|
Bogatov A.
|
| Volume 61, Nº 1-2 (2017) |
Nature of Angular Carbides in Damascus Steel |
(Eng)
|
|
Sukhanov D., Arkhangel’skii L., Plotnikova N.
|
| Volume 61, Nº 1-2 (2017) |
Microstructural Condition Features of High-Strength Steels for Large Diameter Pipes |
(Eng)
|
|
Mentyukov K., Bortsov A., Makushev S., Shabalov I., Lipunov Y., Sychev O.
|
| Volume 61, Nº 1-2 (2017) |
Plasma-ARC Heating of Periclase-Carbonaceous Refractory |
(Eng)
|
|
Krasnyanskii M., Kats Y., Tyuftyaev A., Gadzhiev M., Sargsyan M., Yusupov D.
|
| Volume 61, Nº 1-2 (2017) |
Effect of Casting Temperature on Continuously-Cast Bearing Steel GCr15 Billet Structure Formation |
(Eng)
|
|
Xu D., Liu H., Peng C., Pei Z., Miao S., Ju D., Zhu M.
|
| Volume 61, Nº 1-2 (2017) |
Contamination of the Metal of a Large Ingot by Oxide, Sulfide, and Oxysulfide Inclusions |
(Eng)
|
|
Gamanyuk S., Zyuban N., Rutskii D., Palatkina L.
|
| Volume 61, Nº 1-2 (2017) |
Evaluating the Thermal Efficiency of a Shaft Furnace for Roasting Siderite Ore |
(Eng)
|
|
Matyukhin V., Shatsillo V., Kuznetsov A., Rybakin D., Krokhalev A.
|
| Volume 61, Nº 1-2 (2017) |
Possibility of Preparing Alloys of the Al–Si System Using Amorphous Microsilica |
(Eng)
|
|
Kuz’min M., Kondrat’ev V., Larionov L., Kuz’mina M., Ivanchik N.
|
| Volume 61, Nº 1-2 (2017) |
Effect of Deformation Heat Treatment on the Structure of Two-Phase Steel in a Bimetal Composite and its Mechanical Properties |
(Eng)
|
|
Molyarov V., Avdeenko A., Kalashnikova A., Molyarov A., Kuz’ko E.
|
| Volume 61, Nº 1-2 (2017) |
A Die Assembly for Hydrodynamic Drawing of Nichrome Strips |
(Eng)
|
|
Snigirev A., Zheleznyak L., Snigirev N., Burunov A.
|
| Volume 61, Nº 1-2 (2017) |
Production Trial of a New Heat-Resistant Alloy with Low Density with Single-Crystal GTE Blade Casting |
(Eng)
|
|
Visik E., Tikhomirova E., Petrushin N., Ospennikova O., Gerasimov V., Zhivushkin A.
|
| Volume 61, Nº 1-2 (2017) |
Use of Quartz-Containing Materials as Fluxes in Copper Smelting Production |
(Eng)
|
|
Selivanov E., Klyushnikov A., Gulyaeva R.
|
| Volume 61, Nº 1-2 (2017) |
Pyrometallurgical Treatment of a Nepheline Charge Using Additives of Natural and Technogenic Origin |
(Eng)
|
|
Bazhin V., Brichkin V., Sizyakov V., Cherkasova M.
|
| Volume 61, Nº 1-2 (2017) |
Preparation of Manganese Powder Steels by Hot Forging Porous Workpieces in the Presence of a Liquid Phase |
(Eng)
|
|
Dorofeev Y., Dorofeev V., Batienkov R., Skorikov A., Ganshin A.
|
| Volume 61, Nº 1-2 (2017) |
Effect of Stoichiometric Reductants on the Process of Ferrochrome Production at 1200–1550°C |
(Eng)
|
|
Mosoma W., Kalenga wa Kalenga M., Pan X.
|
| Volume 61, Nº 1-2 (2017) |
Correlation of Metallized Pellet Decarburization, Heating, and Melting in an Arc Furnace |
(Eng)
|
|
Merker E.
|
| Volume 61, Nº 1-2 (2017) |
Simulation of Rotary Piercing Process |
(Eng)
|
|
Bogatov A., Nukhov D., Toporov V.
|
| Volume 61, Nº 1-2 (2017) |
Simulation of the Behavior of Pipes with Variable Wall Thickness Under Internal Pressure |
(Eng)
|
|
Orlov G., Kotov V., Orlov A.
|
| Volume 61, Nº 1-2 (2017) |
Innovative Directions for Utilization of Ferrous Metallurgy Waste in Ceramic Brick Production |
(Eng)
|
|
Imangazin M., Abdrakhimova E., Abdrakhimov V., Kairakbaev A.
|
| 426 - 450 de 725 resultados |
<< < 13 14 15 16 17 18 19 20 21 22 > >>
|
